• Other Fluke companies:
  • Fluke
  • Fluke Biomedical
  • Fluke Networks
  • Fluke Process Instruments
See more Fluke brands
Accelix Amprobe Beha-Amprobe Comark Emaint Landauer Pacific Laser Systems Pomona RaySafe Schad
Home
Precision, Performance, Confidence.
Fluke Calibration: Oceania
  • Register
  • Log in
  • Contact Us

AU - English [Change]

 

Top 5 sources of RF calibration error

RF Calibrator Cables & Connectors

RF and microwave calibration is one of the most complex areas of metrology, with many opportunities for human and measurement errors. Here are the top 5 sources of error:

  • Mismatch errors. Mismatch errors are one of the most significant contributors to errors and uncertainties in RF and microwave calibration. Mismatch error depends on the source and load match. The quality of the source and load match contributes to the mismatch error. Avoid introducing excessive mismatches by using worn or damaged connectors and inappropriate cables. You can help to reduce mismatch errors by inserting a ‘masking pad’ attenuator with good match characteristics at the point where the match is worst or most variable. 
  • Choosing the wrong cables and connectors, or not maintaining them regularly. Consider cables and connectors to be like any other calibrated items in the laboratory:

    * Include them in routine maintenance and calibration schedules.
    * Serialize or tag them as a means of identifying individual items.
    * Inspect them regularly for damage and other degradation that might affect performance. 

Poorly performing coaxial devices and interconnections

  • Poorly performing coaxial devices and interconnections. Poor performance can often be traced to problems with out-of-tolerance dimensions, cleanliness, damage or incorrect tightening of connectors. Inspect connectors for damage and dirt before connecting them. Gauge all coaxial connectors on a routine basis to detect any out-of-tolerance mechanical conditions. When connecting or disconnecting, avoid over-tightening and be sure to use a torque wrench to ensure correct tightening torque. 

Using a 20 dB attenuator to reduce a signal source output level to within the power sensor input level range.

  • Applying correction factors incorrectly. Incorrect arithmetic and algorithms can easily end up in automated calculations within spreadsheets and software. Mistakes can often go undetected when applied corrections are small. It is good practice to test and validate any calculations with deliberately large numbers to make the effect of applying correction factors more easily observed.

Typical Power Splitter Application of Precision Leveling

Typical power splitter application of precision leveling, where a power sensor is connected to one splitter output port and the leveled signal appears at the other output port connected to the device under test.

Typical power splitter application of precision leveling connected to signal generator and power meter

The reflection travels twice through the masking pad inserted between source and load, reducing by twice the masking pad attenuation value, thus reducing mismatch error.

  • Working with power splitters and dividers. The difference between power splitters and power dividers and their applications is often misunderstood, leading to incorrect choice of device and attendant measurement errors. Both devices may be used to split or combine signals, and sometimes the appropriate choice may be unclear. The power splitter provides two well-matched impedances, close to 50 Ω, between the input and each output port. The power divider is the equivalent of three equal (approximately 16.6 Ω) resistors.

Recommended Products

96270A 27 GHz Low Phase Noise Reference Source
96040A Low Phase Noise Reference Source

Recommended Resources

Minimizing RF Mismatch Errors and Uncertainties - application note
Choosing and using cables for RF calibration - application note
Making Repeatable RF Connections During RF Calibration - application note
Speak with a calibration expert

  • Home
  • Products
    • New Products
    • Electrical Calibration
      • Electrical Standards
      • Electrical Calibrators
      • Bench Multimeters
      • Electrical Calibration Software
    • RF Calibration
      • RF Reference Sources
      • RF Calibration Accessories
      • RF Calibration Software
    • Data Acquisition and Test Equipment
      • Bench Multimeters
      • Data Acquisition
      • Data Acquisition Software
    • Temperature Calibration
      • ITS-90 Temperature Standards
        • ITS-90 Fixed-point cells
        • Standard Platinum Resistance Thermometers
        • Maintenance Apparatus
        • Liquid Nitrogen Comparison Calibrator
        • Resistance Bridges
        • Standard Resistors
      • Calibration Baths
        • Compact Calibration Baths
        • Standard Calibration Baths
        • Special Application Baths
        • Bath Accessories
        • Bath Controllers
        • Bath Fluids
      • Industrial Calibrators
        • Field Metrology Wells
        • Metrology Wells
        • Handheld Calibrators
        • Field Dry-Block Calibrators
        • Micro Baths
        • Infrared Calibrators
        • Thermocouple Furnaces
        • Dual Block Dry-Well
        • Zero-point Dry-Well
      • Probes / Sensors
        • Platinum Resistance Thermometers (PRTs)
        • Thermistors
        • Thermocouples
      • Digital Thermometer Readouts
      • Multifunction Calibrators
      • Temperature Calibration Software
    • Humidity Calibration
      • Humidity Generators
      • Humidity Data Loggers and Monitors
    • Pressure Calibration
      • Piston Gauges
        • NMI Piston Gauges
        • Absolute Piston Gauges
        • High Pressure Pneumatic Piston Gauges
        • Hydraulic Piston Gauges
        • Piston Gauge Accessories
      • Automated Pressure Controller / Calibrators
        • Low Pressure Controllers / Calibrators
        • Pneumatic Pressure Controllers / Calibrators
        • High Pressure Pneumatic Controller / Calibrators
        • Hydraulic Controller / Calibrators
      • Pressure Monitors
        • Low Pressure Monitors
        • Digital Pressure Gauges
        • Reference Pressure Monitors
      • Deadweight Testers
        • Pneumatic Deadweight Testers
        • Oil Deadweight Testers
        • Water Deadweight Testers
        • High-Pressure Hydraulic Deadweight Testers
        • Deadweight Tester Accessories
      • Manual Pressure Calibration
        • Pressure Calibrators
        • Pneumatic Pressure Control
        • Hydraulic Pressure Comparators / Pumps
      • Handheld Pressure Calibrators
      • Air Data Calibration
      • Environmental Monitors
      • Pressure Calibration Accessories
      • Pressure Calibration Custom Systems
      • Pressure Calibration Software
    • Flow Calibration
      • Gas Flow Standards
      • Gas Flow Accessories
      • GFS Primary Gravimetric Flow Standard
      • Flow Calibration Software
    • Process Calibration Tools
      • Temperature Calibrators
        • Handheld Temperature Calibrators
        • Dry-Block Calibrators and Micro-Baths
        • Precision Digital Thermometers
        • Temperature Probes
        • Infrared Calibrators
        • Hygro Thermometer with Data Logging
      • Pressure Calibrators
        • Digital Pressure Calibrators
        • Handheld Pressure Calibrators
        • Deadweight Testers
        • Precision Digital Pressure Gauges
        • Calibration Hand Pumps
      • Multifunction Calibrators
      • mA Loop Calibrators
      • Process Calibration Software
    • Calibration Software
      • MET/CAL® Software
      • MET/CAL® Support
      • Asset Management Software
      • Temperature Calibration Software
      • Pressure Calibration Software
      • Flow Calibration Software
      • Mechanical / Dimensional Calibration Software
    • Service and Support
    • All Calibration Instruments
  • Purchase Info
    • Where to Buy
    • Request a Quote
    • Request a Demo
    • Request a Sales Consultation
    • Certified Pre-Owned Equipment
    • General Services Administration (GSA)
    • Financing Program
    • National Stock Numbers (NSNs)
    • Payment Options and Tax Info
  • News
    • Press Releases
    • Promotions
    • Industry Links
    • Metrology Salary Survey
  • Training and Events
    • Conferences and Exhibitions
    • Training Courses
    • User Group Meetings
    • Web Seminars
      • Live Seminars
      • On-Demand Seminars
  • Literature and Education
    • Education Hub
    • About Calibration
    • Articles and Education
    • Product Literature
    • Product Manuals (User Guides)
    • Videos and Virtual Demos
    • Blog
  • Service and Support
    • Service Request (RMA)
    • Service Plans
    • Technical Support
    • Knowledge Base
    • Accreditations
    • Authorized Service Centers
    • Calibration Certificates
    • Community Forum
    • My MET/SUPPORT
      • Activate
      • Procedures
      • Software
      • Technical Bulletins
      • Priority Support
      • Manuals
    • Product Manuals (User Guides)
    • Safety Data Sheets (SDS)
    • Safety, Service, and Product Notices
    • Software Downloads
    • Tools
      • PT100 Calculator
      • ITS-90 Reference Function Calculator
      • Thermocouple Table Voltage Calculator
      • Thermocouple Voltage to Temperature Calculator
  • About Us
    • Contact Us
    • Visit Us
    • Employment
    • Fluke Calibration
      • Hart Scientific Temperature Calibration
      • DH Instruments Pressure and Flow Calibration
      • Pressurements Pressure Calibration
      • Ruska Pressure Calibration
    • Fluke Companies
    • Integrity and Compliance
    • Frequently Asked Questions
Home|Blog|Top 5 sources of RF calibration error
©1995-2023 Fluke Corporation
             

Secondary menu

  • Disclaimer
  • Privacy Statement
  • Terms of Use
  • Terms of Sale