- Other Fluke companies:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
See more Fluke brands
Thermocouple Table Voltage Calculator
|
|
Select one of the 8 letter-designated thermocouple types from the console, type any temperature within the thermocouples range into the Temperature window and press calculate. The calculator will produce the NIST thermocouple table value for that temperature along with the sensitivity or Seebeck coefficient (dV/dT).
All thermocouple voltages are given in millivolts (mV). The Seebeck coefficient (given in mV/°C) describes the slope of the reference function at the selected temperature and can be used to calculate the impact of an incremental change in temperature on thermocouple voltage. Reference junction (cold junction) compensationThe thermocouple table values given by this calculator are based on a reference junction (cold junction) temperature of 0 °C (32 °F). If that assumption is incorrect then a voltage correction must be added to these values to compensate. DisclaimerIt is not recommended that you rely exclusively on this calculator,which is provided for information purposes only. While we have taken reasonable steps to ensure that the values generated by this calculator are correct, no warranty is made, either express or implied, as to its accuracy or fitness for purpose. We cannot accept responsibility for the consequences of errors or omissions in the information provided. |
Other calculators:
Thermocouple Voltage to Temperature Calculator»
ITS-90 Reference Function Calculator »
Related products:
Learn about thermocouples
Application notes and papers
Calculating Uncertainties in a Thermocouple Calibration System
How to Calibrate a Thermocouple
How to Select Thermocouple Calibration Equipment
The Calibration and Use of Thermocouple Simulators
Video
Introduction of the 9118A thermocouple calibration furnace
See the lineup of Fluke thermocouple products
We'd like your feedback.
You can help us improve our website »
Thank you!
If you purchased an item from a Fluke authorized distributor, please contact them directly with questions regarding Certificates of Calibration or other documentation.
Support requests for items purchased from, or serviced directly by Fluke and general Metrology questions can be submitted via our online Support Request form and a Fluke representative will be in contact with you.